Small motor boat for a family holiday Askold-18
Technical Data
| Length overall (LOA) | 5.5 m. |
| Beam overall (BOA) | 2.4 m. |
| Draught | 0.4 m. |
| Displacement | 1.2 t. |
| Engine power | 9.9 hp. |
| Speed under engine | 6 knots |
| Sail area | - |
| Places for sleeping | 2 pers. |
| Passengers | 4 pers. |
| Fuel tank | 43 l. |
| Water tank | 55 l. |
Add to compare /
print
Video:
Description:
The vessel is styled on a small tugboat and is supposed to be used as a pleasure craft both on inland waters and near-shore areas. It is a transom-stern boat and it has round-bilge hull. The longitudinal and transverse framing is laminated and made of oak. The strip planking is made of selected ship construction pine. There is a glass deck house made of triplex safety glass in the middle section of the boat hull.
The self-bailing cockpit is found at the after end. Its floors are made of bakelite plywood and are supplied with an oak grating. For reasons of safety the self-bailing cockpit is supplied with a high washboard. The self-bailing cockpit has a stern seat supplied with a soft sofa and the scuttle leading to the after peak, the ladder and some lidded locker located under the side deck of the upper deck. The air hatch and the hatch to get to the fore deck are located in front of the deck house. The deck is coated with teak wood battens.
An outboard motor Mercury F9.9 ELPT BigFoot installed on the vessel.
The deckhouse is provided with two pieces of sleeping accommodation, a table, a locker, the galley table supplied with a sink and a gas stove, and the control post. The marine boat toilet supplied with a drop cover is found in the chest. Boat and personal belongings are supposed to be kept in the forepeak, the transom lockers, the cockpit lockers and the after peak.
The deck house, the cape, the washboard and joint-work details are made of mahogany massif and mahogany sea plywood.
The ship handling is performed from the deck house using the operating wheel and the outboard motor transmission.
The electrical system includes the 45 Ah accumulator plant, the navigation lights, the lighting fitting, the charging base, the convenience outlets and the land-based power cable.
The boat is equipped with the 13.6 kg anchor, the anchor cable, the mooring fittings, the manually-operated and electric drainage pumps, the freshwater system, the waste water system, the windscreen wipers and the oil fuel tank.
The navigation equipment might be installed according to the customer preferences.
